JUUP stove stones in the sauna
LÖYLY & PHYSICS

Löyly has character.

It can be soft and humid or sharp and hot. In JUUP stoves, the steam character is born from how water, stones and heat meet.

DUAL STONE CHAMBER · IIVARI & GÖSTA

Two stone compartments. You decide the character of the steam.

In the dual stone chamber structure of Iivari and Gösta, the inner stone bowl sits directly above the firebox and is separated from the surrounding stone mass. The compartments heat up differently, so the steam they create is distinct.

The stones at the base of the stone bowl become significantly hotter than the surface stones. When water is poured into the bowl, it travels to the hottest stone layer and vaporizes there. The steam rises through cooler surface stones and cools slightly, yielding softer, rich steam.

Pour water gently into the centre of the bowl for soft, lingering löyly. According to the guides, the edges of the bowl give a hotter, sharper sensation. Punos and Havu also offer exposed outer stones as a different pouring surface; on Kaski, pour water into the stone bowl.

JUUP stove dual stone chamber and inner stone bowl seen from above

Inner stone bowl

Directly above the fire chamber.
Soft, humid and lingering steam.

Outer stone mass

Exposed in Punos and Havu.
A different pouring surface for each structure.

EFFICIENT AIRFLOW

Even warmth throughout the sauna.

Natural airflow of JUUP stove from sauna floor level

Cool air in from below. Warm air back into the sauna from above.

Warm air and steam naturally layer upwards in a sauna. This is the foundation of the sauna bench rule: the foot bench is recommended to be placed at or above the upper edge of the stove stones, ensuring feet stay within the warm air and steam zone.

JUUP stoves circulate the sauna room air efficiently. The stove draws cooler air from floor level into its base and between the core and outer casing. The air heats as it travels through the stove and flows strongly back into the room from the top.

Continuous natural convection transfers the heat generated by the fire quickly into the room, mixing the air and reducing thermal stratification. The sauna heats up quickly and evenly, extending pleasant warmth down to foot level.

With the lower Iivari, standard bench dimensions often satisfy the bench rule naturally. Original and Gösta are notably taller, placing the foot bench below the stone surface. Thanks to their strong airflow, feet do not stay cold, and benches do not need to be raised.

Good sauna design remains important. Benches should be positioned sufficiently high so the bather sits where heat and steam are at their finest – close to the ceiling.

Smoke-sauna-like löyly and the Original

For a soft, humid and lingering löyly, the Original and its deep stone bowl are one option. Its sauna guide describes pouring water into the centre for a softer sensation and onto the edges for a sharper one. The experience can evoke a smoke sauna, although this is a continuously heated wood-burning stove connected to a chimney.

The stones, sauna temperature, ventilation and amount of water all affect the experience. Heat the stones thoroughly and follow the instructions for your stove.

Explore Original · Stove sizing · Sauna guides and manuals

KASKI STRUCTURE · IIVARI & GÖSTA

Crisp, lively steam. The clean lines of a steel shell.

Kaski is the streamlined steel-cased structure of the JUUP collection. The solid steel casing guides the heat from the fire chamber directly and tightly to the internal stone bowl and flue, keeping the exterior minimalist.

In Kaski, the stones sit inside the steel casing. The stated stone quantity for Iivari and Gösta Kaski is approximately 50 kg.

Pour water into the stone bowl: try the centre for softer, lingering löyly and the edges for a sharper sensation. The temperature of the stones and sauna also affects the experience.

JUUP Kaski stove with solid steel casing in an atmospheric sauna
Fast

Ignites easily and heats rapidly

50 / 50 kg

Iivari / Gösta

70–80 °C

Optimal sauna temperature

PUNOS STRUCTURE · IIVARI & GÖSTA

Balanced and versatile. The union of steel and mesh.

Punos combines a clean steel lower base with an airy upper stone mesh. It is the most versatile option in the JUUP range, uniting rapid heat transfer with the softness of an open stone surface.

The upper stone mesh raises the stone volume to a balanced level (approx. 75 kg in Iivari and Gösta). The generous stone surface gives full freedom to vary the steam character by pouring water into the basin or onto the mesh stones.

In Punos, the orientation of the upper mesh and firebox hatch can be freely adjusted during installation before stone placement, allowing ideal adaptation to the sauna room layout. Optimal bathing temperature is approx. 70–80 °C.

JUUP Punos stove upper mesh structure in the sauna
Versatile

Balanced heat and wide steam range

75 / 75 kg

Iivari / Gösta

70–80 °C

Optimal sauna temperature

HAVU STRUCTURE · IIVARI & GÖSTA

Large stone mass. Gentle and long-lasting heat.

Havu is the fullest mesh structure in the JUUP stove line. The open mesh casing wraps the stove from floor to top, housing an impressive stone volume: approx. 130 kg in Iivari and approx. 200 kg in Gösta.

The stone bowl sits directly above the firebox, surrounded by outer stones. Heating depends on factors such as the size of the sauna and its starting temperature.

The sauna guides describe pouring a steady stream along the edge of the stove for gentle, lingering steam, especially at the start of a session. You can also try the centre and edges of the stone bowl.

JUUP Havu stove open mesh casing and dual stone chamber in the sauna
Heat-storing

Deep and long-lasting gentle heat

130 / 200 kg

Iivari / Gösta

60–70 °C

Optimal sauna temperature

Explore stoves or find a dealer

Find the right model for your sauna from our three stove families.

JUUP

When the rest of the world stays outside.